--- Updated: 9/4/2020 ---
NOTE to Used Machinery BUYERS
Ocean Machinery specializes in sourcing and selling used machinery to the structural steel fabricating industry. If you are looking for used machinery and you don't see the item you want listed here, please contact us as we are normally always able to find you that special used machine for your operation. Please also note that our used machinery inventory changes from day to day, so if you are looking for a specific piece of used machinery, and you do find it here, you should call immediately to secure it, as we do move certain items of used machinery fairly quickly. Please click here for tips on selling your used machinery.
Please note that our in-house inventory of USED MACHINERY is updated on a regular basis, but the inventory shown on this web site might be out of date so please email or call us for our latest offerings.
Note to Used Machinery SELLERS
If you are a fabricator or used machinery broker, and have Used Machinery that you would like to sell and it fits into our typical Used Machinery profile as shown below, please call us. We have tremendous activity in our Used Machinery Department and we are able to move reasonably-priced good-quality Used Machinery fairly quickly
** The following Used Machinery Sales List should give you an idea of the used machinery that we typically list and sell. If you find a machine listed as SOLD below, please call us as we will often be able to find similar equipment at very short notice.
Avenger CNC Dill Line - READY TO MOVE.
Year Built: 2017
Stock #: AW001-KC
Condition: Excellent Condition - 1408 hrs as of 8/31/20
PRICED TO MOVE!!!
ONLY $100,000 Call NOW 1-800-286-3624
Terminator 18/25 - READY TO MOVE.
Year Built: 2016
Stock #: AW002-KC
Condition: Excellent Condition
PRICED TO MOVE!!!
ONLY $32,000 Call NOW 1-800-286-3624
STRB4824 Shot Blaster - READY TO MOVE.
Year Built: 2007
Stock #: TCW002-HF
Condition: Good Operating Condition
NOTE: Does not include dust collector
PRICED TO MOVE!!!
ONLY $10,000 OBO! Call NOW 1-800-286-3624
Ocean Avenger CNC Drill Line in good working condition.
Year Built: 2006
Stock #: EA001-FK
Table Size: 60'
Condition: Good - Currently under power
PRICED TO MOVE!!!
ONLY $50,000! Call NOW 1-800-286-3624
Ocean Avenger CNC Drill Line in good working condition.
Year Built: 2006
Stock #: JTS001-DT
Table Size: 60'
Condition: Good
Ocean Avenger CNC Drill Line in great working condition. Can be viewed under power.
Year Built: 2012
Stock #: TCW001-JN
Table Length: 60'
Condition: Good - Currently Under Power
These machines come with 70' in-feed conveyor, 65' out-feed and cross transfers.
Year Built: 2005
Stock #: SC001-JN
In-Feed Conveyor Length: 70'
Out-Feed Conveyor Length: 65'
Condition: Good - Currently Under Power
PRICED TO MOVE!!!
ONLY $175,000! Call NOW 1-800-286-3624
The Clipper uses a patented design featuring a drill and a punch in-line with each other, creating a dramatically more compact machine, not much bigger than an ironworker. This small compact size not only reduces the cost significantly, it also reduces the drop to only 8" (250mm).
Stock #: CEF001-JN
Year Built: 2008
Capacity: 6" x 6" x 5/8"
The Ocean Avenger not only lays out and drills all your holes in any steel profile in a fraction of the time it takes you to do it manually with a mag drill, but it also lays out the marks for all your welded attachments, virtually eliminating the need for a tape measure.
Model Type: B Model
Stock #: JWC001-KC
Year Built: 2004
Table Length: 60'
Hours of Use: 5,719
Condition: Good - Viewable under power
- Linear rails/bearings replaced < 2 years
- PCU replaced < 18 months
- Water pump, regulator & spindle bearings replaced < 6 months
The DCM 18/25 dual column band saw can miter to 60 degrees in both directions.
It is specifically designed for structural steel fabricators to handle the larger beams and profiles, and the heaviest sections that structural steel fabricators cut on a daily basis.
Model Type: DCM 18-25
Stock #: HY001-HF
Year Built: 2013
Factory Reconditioned: 2018
SPECIFICATIONS
Capacity: 18" high x 25" wide
Miter: +60° & -60°
Horsepower: 10
Blade: 1-1/2"
Speed: 50-370 fpm
Table Height: 36"
Weight: 6,000 lbs
The DCM 18/42 dual column band saw can miter in both directions.
Specifically designed for structural steel fabricators to handle the largest beams and profiles, and the heaviest sections that structural steel fabricators cut on a daily basis. The ability to miter cut both directions significantly reduces the material handling time, further improving your profitability.
Model Type: DCM 18-42
Stock #: MT001-JN
Year Built: 2007
SPECIFICATIONS
Capacity: 18" high x 42" wide
Miter: +45° & -60°
Horsepower: 10
Blade: 2"
Speed: 40-300 fpm
Table Height: 31"
Weight: 12,000 lbs
Used 12" x 39" PMC12 Trennjaeger Longitudinal Circular Cold Saw. This machine has refurbished hydraulics and is currently under power.
Model Type: PMC 12
Stock #: GL001-JN
Cut Capacity: 12" x 39"
Vertical Clamp Stroke: 15-7/8"
Saw Blade: 760mm, 800mm, 910mm
Used Semipaxy Geka Iron Worker. This machine has a programmable CNC positioning system for punching. Machine is still in production and can be seen under power if desired.
Model Type: 110 SD Semipaxy
Year Install: 2008
Used 60 Ton Edwards Ironworker in good condition.
1 phase / 220v / 60hz
Model Type: 60 Ton
Condition: Good
Included:
Used Ocean Avenger CNC Beam Drill Line in good condition. This machine is still in production and can be seen under power until mid-July 2017.
Model Type: Avenger B
Stock #: BS001-KC
Year Install: 2005
Condition: Good
Machine has the following upgrades:
Used Ocean Avenger CNC Beam Drill Line in good condition. This machine is still in production and can be seen under power. Rebuilt just 2 months ago.
Model Type: Avenger B
Year Install: 2010
Condition: Good
Machine has the following upgrades:
Used Ocean Avenger CNC Beam Drill Line in good condition. This machine is still in production and can be seen under power.
Model Type: V-18
Year Install: 1996
Condition: Good
Machine has the following upgrades:
Used Ocean Avenger CNC Beam Drill Line in good condition. This machine is still in production and can be seen under power.
Model Type: Avenger B
Year Install: September 2005
Condition: Good
Machine has the following upgrades:
Used Ocean Terminator in good condition. Dual column Double Mitering saw. This machine is still in production and can be seen under power.
Model Type: Terminator 20/30
Year Install: 2005
Condition: Good
Used Ocean Avenger CNC Beam Drill Line in excellent condition. This customer has updated their Avenger to the Avenger PLUS and is looking to sell this at a very attractive price.
Model Type: Avenger B
Year Install: December 2011
Condition: Very Good - currently producing. 2520 Hours
Machine has the following upgrades:
Uniquely engineered and designed single slide universal hydraulic steelworker complete with five work stations. All forces generated through punching, shearing and notching, are equally distributed throughout the slide and body plates, not through the hydraulic cylinder - eliminating shock and stress on the hydraulic system.
Model Type: Peddiworker 1050
Condition: Very Good
Machine Specs:
PUNCH UNIT
SHEAR SECTION
BAR STOCK SHEAR
FLAT SHEAR
NOTCHER (with square coper)
NOTCHER (with triangular notchers)
Used Ocean Avenger CNC Beam Drill Line in excellent working condition. This customer has updated their Avenger to the Avenger PLUS and is looking to sell this at a very attractive price.
Model Type: Avenger B / MDL
Year Install: March 7, 2005
Condition: Very Good - over 1 million holes drilled and in great working order.
Machine has the following upgrades:
As you can see from the photos this is a USED Ficep 1001D Beam Drill Line in very good condition. Purchased new Dec 2002. Original owner has had the machine maintained each year by authorized repair technicians. Machine is capable of completing approx 25-30 beams a day. Single spindle can drill diameters from 7/16" to 1 1/4" using internal spray coolant. Machine travels on an included 60'-0" foot bed. Drill line has a vertical clamp and horizontal drill feed. Comes with instruction & operating manuals along with "Steel Projects" CD containing the CNC to NC converters for 1001D programming language. Can be updated to connect to your server and receive programming via your office station or use manual memory card insertion.
This used Plate Roll was manufactured by Hendley - Model 8-E, Serial No. 16536
This 220V 3-phase Ercolina 030 Mega Bender was purchased in 2005 but has never been used.
This used CPHV-100 is in very goo condition. Comes with additional tooling set. Contact us for more info on this machine 1-800-286-3624.